Rack mounting

Parent chapter  Previous page  Next page


Orpheus is supplied configured for table-top operation, with rubber feet attached and no rack-mount ears fitted.


To convert for rack-mounting: First fit the rack-mount ears by removing the front four screws from each side of the unit, using the hex key provided; then replace the same screws to retain the rack ears provided.  If necessary, the rubber feet can be removed by withdrawing the plastic centre-hub of each foot a little way prior to pulling the whole foot out. The hub can be initially raised with a small flat-bladed screwdriver.  Retain the feet for later use.


If Orpheus units are rack mounted, an empty 1U gap should be left above each Orpheus to ensure effective cooling.