LRX2 flexible location recorder - Discontinued
| AUDIO FORMAT | |
| Up to 24 bit, 96kHz Linear PCM. Bit transparent if no processing is selected in software (audio is replayed unchanged if no processing applied). | |
| Channel Count (48KHz/24bit) |
64 channels via MADI card (also in combination with other cards) or 48 channels of Input and Output using AES/EBU or 48 channels of Analogue Input or 48 channels of Analogue Output |
| Channel Count (96KHz/24bit) |
32 channels via MADI card (also in combination with other cards) or 32 channels of Input and Output using AES/EBU or 32 channels of Analogue Input or 32 channels of Analogue Output |
| AUDIO PERFORMANCE | |
| Audio performance is determined by the plug-in I/O Cards ("Slithers"). Please follow the links below for details: | |
|
16 channel microphone/line inputs Provides 16 channels of high quality analogue to digital conversion for microphone or line inputs. |
|
16 channel D/A line outputs Provides 16 channels of high quality digital to analogue conversion at all standard sample rates up to 192kHz with 24bit precision. |
|
16 channel AES3 I/O This card provides 16 channels of high quality digital interface to full AES3 specification and at all standard sample rates up to 96kHz |
|
64 channel LRX MADI I/O The SADiE MADI slither provides optical and electrical MADI input and output for the LRX2 portable multitrack recorder. |
| DIGITAL REFERENCE INPUT (GEN_LOCK) | |
| Connector | XLR Female, transformer balanced and isolated |
| Input Levels | 500mV to 10V p-p |
| Impedance | 100Ω ±10% |
| Equalisation | None |
| COMPLIANCE | |
| CE marked | Yes |
| Conforms to the following standards: | EN50081-1 (EN55022);1995 EN50082-1 (EC 801-2,3,4); 1992 |
| LV and EMC Directives: | 73/23/EEC 89/336/EEC |
| PHYSICAL | |
| Height | 2.56" (65mm) |
| Width | 13" (330mm) |
| Depth | 16.7" (423mm) including connectors |
| Weight | <14lbs (<6kg) |
| ELECTRICAL | |
| Voltage | 12V DC - adaptor supplied |
| Supplied Adaptor | 100W 12V DC, input 90-240V AC, 47-63Hz |
| Connector | 4pin XLR, Pin 1:ground, pins 2&3 n/c, Pin 4: +12V DC |
| Consumption | <50W (depends on fitted slithers) |
| Fuse | 4A (T) |
Specifications subject to amendment.
We're using a few cookies to make your visit here run smoothly.
If you're happy with this, just continue to use the site as normal.
To find out more, visit our 
