Prism Sound's Queen's Award For Enterprise: International Trade 2011
Contact Us!



Resources

Case Studies


Testing to AES17 standards

Linked Resources:
APPLICATION NOTES
AD and DA Converter Testing
Digital Interface Testing (AES3 AES/EBU S/PDIF)

HELP FILES
dScope Series III AES17 Application Help Manual

MANUALS
dScope Series III Applications Manual (A4 format)

RELEVANT PRODUCTS
VSIO Adapter
dScope Series III
The dScope Series III is shipped with a suite of tests which automate the “AES17 standard” specification which apply to any device utilising sampling in its audio chain. This applies particularly to devices where the aim of the equipment is to preserve the integrity of the signal (e.g. A/D or D/A converters), rather than to modify it (e.g., reverberators, pitch shifters etc.).

The dScope AES17 application consists of a menu-driven suite of over 30 tests arranged into the same six groups as the AES standard (“input characteristics”, “output characteristics”, “linear response” etc.). These tests are written in VBScript, which is a standard Windows language used by the dScope as its automation language. The AES17 application is included in the standard dScope installation and is available from the “Applications” button on the user bar.

The menus are dynamically configured to present only the applicable tests depending on whether the device under test has digital or analogue inputs and outputs. Help is available for each test, describing the applicability, the aim and the methodology. The tests have followed the AES standard carefully in the method and presentation of results. Automation makes tests that would otherwise be very time-consuming and laborious as easy as clicking a button on a menu.

The below table lists the tests specified in the AES17 test regime

A-A characteristics A-D characteristics D-A characteristics D-D characteristics
Input characteristics
  • Alias suppression
  • Overload
  • Input level for full-scale amplitude
  • Maximum input amplitude
  • Gain stability
Input characteristics
  • Alias suppression
  • Overload
  • Input level for full-scale amplitude
  • Maximum input amplitude
  • Gain stability
  • A/D jitter susceptibility
Input characteristics
  • Digital input format
  • D/A jitter susceptibility
Input characteristics
  • Digital input format
  • D/A jitter susceptibility
Output characteristics
  • Out-of-band components
  • Image suppression
  • Output amplitude at full-scale
  • Maximum output amplitude
  • System Level stability
Output characteristics
  • Digital output format
Output characteristics
  • Out-of-band components
  • Image suppression
  • Output amplitude at full-scale
  • Maximum output amplitude
  • System Level stability
Output characteristics
  • Digital output format
Linear Response
  • Frequency response
  • Maximum signal level vs frequency
  • Phase Response*
  • Group Delay*
  • Inter-channel phase response
  • Polarity
  • Delay through device
Linear Response
  • Frequency response
  • Maximum signal level vs frequency
  • Phase Response*
  • Group Delay*
  • Inter-channel phase response
  • Polarity
  • Delay through device*
Linear Response
  • Frequency response
  • Maximum signal level vs frequency
  • Phase Response*
  • Group Delay*
  • Inter-channel phase response
  • Polarity
  • Delay through device*
Linear Response
  • Frequency response
  • Maximum signal level vs frequency
  • Phase Response*
  • Group Delay*
  • Inter-channel phase response
  • Polarity
  • Delay through device
Amplitude non-linearity
  • Level-dependent logarithmic gain
  • Intermodulation
  • Signal modulation noise
  • Low-level noise modulation
  • THD+N vs frequency
  • THD+N vs level
Amplitude non-linearity
  • Level-dependent logarithmic gain
  • Intermodulation
  • Signal modulation noise
  • Low-level noise modulation
  • THD+N vs frequency
  • THD+N vs level
Amplitude non-linearity
  • Level-dependent logarithmic gain
  • Intermodulation
  • Signal modulation noise
  • Low-level noise modulation
  • THD+N vs frequency
  • THD+N vs level
Amplitude non-linearity
  • Level-dependent logarithmic gain
  • Intermodulation
  • Signal modulation noise
  • Low-level noise modulation
  • THD+N vs frequency
  • THD+N vs level
Signal-to-Noise
  • Idle channel noise
  • Idle channel noise spectrum
  • Signal-to-Noise Ratio (SNR)
  • Power-line (mains) related products
Signal-to-Noise
  • Idle channel noise
  • Idle channel noise spectrum
  • Signal-to-Noise Ratio (SNR)
  • Power-line (mains) related products
Signal-to-Noise
  • Idle channel noise
  • Idle channel noise spectrum
  • Signal-to-Noise Ratio (SNR)
  • Power-line (mains) related products
Signal-to-Noise
  • Idle channel noise
  • Idle channel noise spectrum
  • Signal-to-Noise Ratio (SNR)
  • Power-line (mains) related products
Cross-talk & separation
  • Inter-channel cross-talk & separation
  • Non-linear inter-channel cross-talk
  • Input-to-output leakage
Cross-talk & separation
  • Inter-channel cross-talk & separation
  • Non-linear inter-channel cross-talk
  • Input-to-output leakage
Cross-talk & separation
  • Inter-channel cross-talk & separation
  • Non-linear inter-channel cross-talk
  • Input-to-output leakage
Cross-talk & separation
  • Inter-channel cross-talk & separation
  • Non-linear inter-channel cross-talk
  • Input-to-output leakage
*Asterisked tests are not currently implemented in the dScope AES17 application

For more information, go to the downloads page and download the dScope Applications manual. The Applications help file is included in the standard dScope installation. For any further help or questions, please contact us using the form below:

Quick Enquiry Form...
Your Name*
Your email address*
Country / State (USA only) *
Query/Comments*
May we put you on our mailing list? yes, put me on your mailing list
        include Recording and Production products
        include SADiE products
        include Logging and Transcription products
authcode should be here
This simple code is required to authenticate your enquiry and reduce spam.
*All asterisked fields are required. Note that we require the country information in order to refer you to your local dealer where appropriate.
Please see also our privacy statement for information about how we use any data you supply.
App ID: 0009, Resource ID: 80