Test and Measurement Technical Data
dS-NET I/O Switcher D-Sub to XLR output cable pinout
The dS-NET I/O Switcher uses a 37-way D-Sub connector for improved cross-talk performance over 25-way types. The D-Sub to XLR balanced output cable pinout is as follows:| D-sub pin (37w male) | Tentacle core | Tentacle ident | XLR type, pin |
| 22 | A | "8" | XLR8 (M) pin 2 |
| 3 | B | XLR8 (M) pin 3 | |
| 4 | Screen | XLR8 (M) pin 1 | |
| 24 | A | "7" | XLR7 (M) pin 2 |
| 5 | B | XLR7 (M) pin 3 | |
| 6 | Screen | XLR7 (M) pin 1 | |
| 26 | A | "6" | XLR6 (M) pin 2 |
| 7 | B | XLR6 (M) pin 3 | |
| 8 | Screen | XLR6 (M) pin 1 | |
| 28 | A | "5" | XLR5 (M) pin 2 |
| 9 | B | XLR5 (M) pin 3 | |
| 10 | Screen | XLR5 (M) pin 1 | |
| 30 | A | "4" | XLR4 (M) pin 2 |
| 11 | B | XLR4 (M) pin 3 | |
| 12 | Screen | XLR4 (M) pin 1 | |
| 32 | A | "3" | XLR3 (M) pin 2 |
| 13 | B | XLR3 (M) pin 3 | |
| 14 | Screen | XLR3 (M) pin 1 | |
| 34 | A | "2" | XLR2 (M) pin 2 |
| 15 | B | XLR2 (M) pin 3 | |
| 16 | Screen | XLR2 (M) pin 1 | |
| 36 | A | "1" | XLR1 (M) pin 2 |
| 17 | B | XLR1 (M) pin 3 | |
| 18 | Screen | XLR1 (M) pin 1 | |
We're using a few cookies to make your visit here run smoothly.
If you're happy with this, just continue to use the site as normal.
To find out more, visit our