DSA-1 FAQs, Tips and Techniques

• Overview
• Tech Spec
• FAQ
• Downloads

General FAQs
?	What is the pin-out of a Null-Modem (serial) cable?
	Answer: The pin-out for the Null-modem cable supplied by Prism Sound for use with dS-NET peripherals connected to the dScope hardware or the serial port of a PC is as follows: DB-9 Socket DB-9 Socket 1 and 6 To 4 3 To 2 2 To 3 4 To 1 and 6 5 To 5 7 To 8 8 To 7 However, if you are building a cable yourself, you only need to connect to the following: DB-9 Socket DB-9 Socket 3 To 2 2 To 3 5 To 5
?	How do I upgrade my DSA-1 firmware?
	Answer: For instructions on how to upgrade the DSA-1 firmware, see this technical note.
?	How is the DSA-1 menu structured?
	Answer: For a table showing the menu structure, please refer to this technical note.
?	What are the capabilities of the DSA-1 Generator?
	Answer: The DSA-1 has two generators with different capabilities. For further details please refer to this technical note.
?	Is Prism Sound calibration traceable to international standards?
	Answer: Yes. The Prism Sound calibration standards and traceability document is available here.

---

My problem is not listed here - what should I try next?

You can do one or more of the following:

Download the DSA-1 manual for full product details. Test and measurement manuals

Contact your local distributor for help. Prism Sound distributors

Contact tech.support@prismsound.com for specific problems not found above.