DA-2 FAQ, Tips and Techniques

DA-2 FAQ (click on the '+' to expand the answer)
	+	How do I change the analogue output level?
Answer Please see this technical tip. (ID = 0019)
	+	How do I set 2-wire or 1-wire 96k mode?
Answer Please see this technical tip. (ID = 0020)
	+	Which digital formats does my DA-2 support?
Answer Please see this technical tip. (ID = 0021)
	+	I want to connect my DA-2 to unbalanced inputs, how should my cables be wired?
Answer For optimum performance the DA-2 should be connected to an unbalanced input using only pins 1 and 2. Pin 2 should connect to the signal conductor and pin 1 should connect to the ground or return. The signal level is then halved. NOTE : Use of output pin 3 instead of 2 will result in phase inversion. (It is possible to drive unbalanced inputs from pins 2 and 3 but this unbalances the output and can lead to hum. In any case do not connect any of the three output pins to each other). (ID = 0022)

My problem is not listed here - what should I try next?

You can do one or more of the following:

Download the DA-2 manual for full product details.

Contact your local distributor for help.

Contact tech.support@prismsound.com for specific problems not found above.